(928) 951-2331 Request Call

Metal Roofing for Arizona: Valley Heat to Mountain Snow

Standing seam and exposed-fastener systems fastened for White Mountains snow load, detailed for Rim Country pine debris, and coated to reflect Gila Valley heat. The 40-year roof, priced in the open.

★ 4.7 stars on GoogleGAF CertifiedLocal, licensed, and insuredStanding seam & exposed fastener
Schedule a free inspection → Call (928) 951-2331
Metal roof installation by Big Buckle Roofing

Our expertise

Metal is the right roof for most of our territory. Here is when it isn't.

Published metal pricing

For a typical 1,800 sq ft home. Standing seam, steep pitch, and complex trim push toward the top.

Monthly: 15 years at 8.99% APR
Architectural shingle $12,200 – $16,900 $123 – $171/mo
Tile $13,500 – $21,600 $137 – $219/mo
Metal $23,600 – $43,100 $239 – $437/mo

Price range estimates, not quotes; the fixed number comes after a free inspection.

Metal is the roof we install most above 5,000 feet and the one we recommend most often for the whole territory. Done right, it is a 40-to-60-year roof. Done wrong, it leaks at year three at every fastener and panel end. The difference is entirely in the installer.

A complete metal system is more than panels: high-temp synthetic underlayment, ice-and-water shield at eaves and valleys above the Rim, properly hemmed eave and rake trim, sealed closures at ridge and hip, and either concealed clips (standing seam) or gasketed screws in the flat of the panel (exposed fastener), never in the rib.

We install standing seam for homes and cabins where the roof is the architecture and where snow slides matter, and exposed-fastener panels for shops, barns, and budget-conscious homes. Both come in the black, blue, brown, gray, green, red, and tan you see across our jobs.

Most metal installs are two to three days: tear-off and dry-in day one, panels and trim day two, details and cleanup day three. Steep or cut-up roofs add time. Because panels are cut to length, there is very little waste and no shingle grit in your yard.

Shingle versus metal, straight: shingle is the value choice and a fine roof in the valley. Metal reflects more heat in Safford and Willcox, sheds needles and snow in Payson and Pinetop, resists embers in Firewise country, and lasts twice as long. If you plan to own the home 15+ years, metal usually costs less per year.

The elevation sets the spec. Gila Valley: light colors and reflective coatings for 110°F surface temps. Rim Country: open valleys and snow-rated clip spacing under ponderosa debris. White Mountains: snow load, wind uplift, and ice-dam detailing at every eave. A Phoenix metal spec fails in two of those three.

Pricing is published by home size at the bottom of this page. Panel profile (standing seam runs higher), gauge, color, trim complexity, and drive time move the number. Your written scope is a fixed line-item price that does not change unless we open the deck and find something we photograph first.

HOA and design review come up with metal. Chaparral Pines and The Rim Club in Payson, Bison Ranch in Heber-Overgaard, and newer Thatcher subdivisions restrict profiles and colors. We handle the packets and color samples as part of the job.

Roof cost calculator

What will my roof cost?

Type in your home's square footage and see your range for shingle, metal, and tile. This is a price range estimate, not a firm quote.

Monthly: 15 years at 8.99% APR
2,700 approximate sq ft of roof

Architectural shingle

GAF Timberline HDZ

$12,200 – $16,900 $123 – $171/mo

Metal roofing

Standing seam or exposed fastener

$23,600 – $43,100 $239 – $437/mo

Tile roofing

$13,500 – $21,600 $137 – $219/mo

Estimates only. Pitch, tear-off layers, decking condition, and drive time move the number. Your written price comes after a free in-person inspection.

Get my exact price, free

What's included

Every metal roof, every town.

  1. 01Full tear-off of existing roofing and haul-away
  2. 02Deck inspection with photos; decking replaced per sheet at a pre-stated price
  3. 03High-temp underlayment across the full deck, ice-and-water above the Rim
  4. 04Panels cut to length standing seam or exposed fastener, your color
  5. 05Hemmed eave and rake trim, sealed ridge and hip closures
  6. 06Snow-rated fastening and clip spacing for your elevation
  7. 07New flashing at chimneys, walls, skylights, and pipes
  8. 08Manufacturer finish warranty plus our workmanship warranty, in writing
  9. 09Final walkthrough and magnetic sweep

See it for yourself

Go deeper

Metal roofing in Arizona: heat, snow, and what actually lasts

Our guide to choosing between shingle and metal at 3,000 feet and at 7,000 feet, with the failure points we see most.

Read the guide →
People also searchmetal roof cost Arizonastanding seam roof Show Lowmetal roofing Payson AZmetal roof Saffordmetal roof vs shingle Arizonametal roofers Pinetop-Lakeside

Straight answers

Metal Roofing questions we hear every week.

How much does a metal roof cost in Arizona?
For a typical 1,800 sq ft home, most metal roofs land between $23,600 and $43,100, or about $239 – $437 a month on 15-year financing at 8.99% APR. Standing seam, steep pitch, and complex trim push toward the top. Use the calculator on this page for your home.

Standing seam or exposed fastener?
Standing seam hides the fasteners under the panel, sheds snow cleanly, and is the longer-lived, more architectural option for homes. Exposed-fastener panels cost less and are ideal for shops, barns, and outbuildings, or for budget-conscious homes if you accept gasket maintenance in 15 to 20 years.

Is a metal roof loud in the rain?
Not over a solid deck with underlayment, which is how we install it. The barn-roof drumming people remember comes from panels over open purlins.

Does metal help with heat in the valley?
Yes. Light and cool-rated colors reflect a large share of solar heat, which lowers attic temperatures in Safford, Thatcher, and Willcox summers. Pair it with proper ridge and intake ventilation.

How does metal handle White Mountains snow?
Well, when fastened for it. We spec clip spacing and fastener patterns for snow load, add ice-and-water shield at eaves, and can install snow guards above entries so slides don't land on your porch.

Will a metal roof hold up to hail and wind?
Yes. Most panels carry Class 4 impact ratings and high wind uplift ratings when installed to spec, which can also help with insurance premiums. Ask us about your carrier.

Can you install metal over my existing shingles?
We tear off. Installing over old shingles hides deck damage, traps heat and moisture, and can void warranties. The tear-off is in the price.

Does metal need HOA approval?
In some communities, yes. Payson's Chaparral Pines and The Rim Club and Heber-Overgaard's Bison Ranch review color and profile. We file the packet and samples for you.

How long does a metal roof last?
40 to 60 years for the panels with a manufacturer finish warranty, typically 30 to 40 years on the paint. Fasteners and sealants on exposed-fastener systems need attention around year 15 to 20.

Do you offer financing on metal roofs?
Yes, through our financing partner, with monthly payment options shown alongside the written scope.

Areas we serve

Metal Roofing, town by town.

Metal Roofing in SaffordMetal Roofing in ThatcherMetal Roofing in PaysonMetal Roofing in GlobeMetal Roofing in Show LowMetal Roofing in SnowflakeMetal Roofing in TaylorMetal Roofing in Pinetop-LakesideMetal Roofing in Heber-OvergaardMetal Roofing in Queen CreekMetal Roofing in ChandlerMetal Roofing in MesaMetal Roofing in Apache JunctionMetal Roofing in GilbertMetal Roofing in Tempe

Also serving Pima, AZ · Clifton, AZ · Duncan, AZ · Willcox, AZ · Pine, AZ · Strawberry, AZ · Tonto Basin, AZ

Related services

Roof Replacement

Shingle, tile, and metal side by side, with published pricing.

Guide: Metal Roofing in Arizona

Heat, snow, and what actually lasts at 3,000 and 7,000 feet.

Roof Repair

Backed-out fasteners and failed sealant, fixed for good.

Example roof prices

What a metal roof costs, by home size.

Typical single-family homes, full tear-off and a complete new system. Steep pitch, extra layers, decking repairs, and drive time move the number. These are price range estimates, not quotes.

Monthly: 15 years at 8.99% APR
Home size
Architectural shingle
Tile
Metal
1,500 sq fthome
$10,100 – $14,100 $103 – $143/mo
$11,300 – $18,000 $114 – $182/mo
$19,700 – $35,900 $200 – $364/mo
2,000 sq fthome
$13,500 – $18,800 $137 – $190/mo
$15,000 – $24,000 $152 – $243/mo
$26,300 – $47,900 $266 – $485/mo
3,000 sq fthome
$20,300 – $28,100 $205 – $285/mo
$22,500 – $36,000 $228 – $365/mo
$39,400 – $71,800 $399 – $728/mo
4,000 sq fthome
$27,000 – $37,500 $274 – $380/mo
$30,000 – $48,000 $304 – $487/mo
$52,500 – $95,700 $532 – $970/mo
5,000 sq fthome
$33,800 – $46,900 $342 – $475/mo
$37,500 – $60,000 $380 – $608/mo
$65,600 – $119,600 $665 – $1,213/mo

Have a different size? Use the calculator above, or schedule a free inspection for a fixed written price.

Start with the roof in front of you.

Free in-person inspection. Photos. A written scope within two business days. No pressure, stated and meant.

Schedule a free inspection → Call (928) 951-2331