Metal Roofing in Tempe

Standing seam and exposed-fastener systems coated to reflect valley heat in Tempe. The 40-year roof, priced in the open. It starts with a free in-person inspection.

★★★★★ 4.7 stars on GoogleGAF CertifiedCity of Tempe permit for re-roofs permits handled~2 hrs 50 min from our Thatcher office

Putting metal on a roof in Tempe

What we know about Tempe roofs that a Valley roofer doesn't.

Downtown / Mill AvenueTempe Town LakeMitchell ParkKiwanis Park areaSouth TempeWarner / McClintockPapago Park edge

Older than most of the East Valley: 1950s–70s ranch and low-slope block near downtown and ASU, 1980s–90s south Tempe, and scattered newer infill. Flat and low-slope decks are common; tile shows up more south of Baseline. As those 1950s roofs age out in the valley, metal is the upgrade we recommend most often in Tempe, because it reflects valley heat, takes hail better than shingle, and lasts twice as long. Done right, it is a 40-to-60-year roof. Done wrong, it leaks at year three at every fastener and panel end. The difference is entirely in the installer.

What Tempe does to a roof: older ranch and block homes pond at scuppers and patio covers Tempe sits lower and denser; roof-surface temps and attic heat run high A complete metal system here is more than panels: high-temp synthetic underlayment, ice-and-water shield at valleys and penetrations, ridge and intake ventilation sized to the attic, and light or cool-rated colors that reflect heat instead of soaking it up, properly hemmed eave and rake trim, sealed closures at ridge and hip, and either concealed clips (standing seam) or gasketed screws in the flat of the panel, never in the rib.

tight lots, alley load-in, and occupied rentals change how a crew stages re-roofs need a permit; historic or design overlay can apply near downtown We install standing seam for homes and cabins where the roof is the architecture, and exposed-fastener panels for shops, barns, and budget-conscious homes. Both come in the black, blue, brown, gray, green, red, and tan you see across our Tempe jobs.

Neighborhood by neighborhood: Downtown / Mill Avenue, Tempe Town Lake, and Mitchell Park are where most Tempe metal conversations start. Kiwanis Park area, South Tempe, and Warner / McClintock add outbuildings and shops where exposed-fastener panels are the practical choice.

Most Tempe metal installs are two to three days: tear-off and dry-in day one, panels and trim day two, details and cleanup day three. City of Tempe permit for re-roofs; historic or design overlay review can apply near downtown and some planned south Tempe neighborhoods. We pull the permit and handle the paperwork. You get photos at every stage and a walkthrough of the finished roof.

What metal costs in Tempe

Most Tempe metal roofs run $24,000 to $43,000, against $12,000 to $17,000 for shingle.

For a typical 1,800 sq ft home. Standing seam, steep pitch, complex trim, and cool-rated finishes push toward the top. The exact number comes from a free inspection and is a fixed line-item price.

Monthly: 15 years at 8.99% APR

Exposed fastener, simple gable

$18,400 – $45,500 $186 – $461/mo

Metal, 1,400 to 1,900 sq ft home. Typical Downtown / Mill Avenue home or shop, gasketed screws in the flat of the panel, your color.

Standing seam, cut-up roof

$28,900 – $71,800 $293 – $728/mo

Metal, 2,200 to 3,000 sq ft home. Concealed clips, hemmed trim, valleys and dormers.

Shingle alternative

$10,800 – $22,500 $109 – $228/mo

Shingle, 1,600 to 2,400 sq ft home. GAF architectural shingle for the homeowner who will sell in under ten years.

Roof cost calculator

What will my roof cost?

Type in your home's square footage and see your range for shingle, metal, and tile. This is a price range estimate, not a firm quote.

Monthly: 15 years at 8.99% APR
2,700 approximate sq ft of roof

Architectural shingle

GAF Timberline HDZ

$12,200 – $16,900 $123 – $171/mo

Metal roofing

Standing seam or exposed fastener

$23,600 – $43,100 $239 – $437/mo

Tile roofing

$13,500 – $21,600 $137 – $219/mo

Estimates only. Pitch, tear-off layers, decking condition, and drive time move the number. Your written price comes after a free in-person inspection.

Get my exact price, free

Financing available through financing partner; monthly payment ranges shown alongside the written scope. Decking replacement is priced per sheet up front and photographed before it's billed.

How a Tempe metal Roofing job goes

Two to three days on site. Everything else handled from Thatcher.

  1. 01

    Free inspection, roof and attic, photo report same day, shingle and metal numbers side by side.

  2. 02

    Written scope in two business days: profile, gauge, finish, color, warranty, exclusions.

  3. 03

    Permit: City of Tempe permit for re-roofs permit pulled.

  4. 04

    Day one: tear-off, deck inspection and photos, high-temp underlayment, ice-and-water where the elevation calls for it, dry-in.

  5. 05

    Day two: panels cut to length, hemmed eave and rake trim, ventilation and flashing.

  6. 06

    Day three: details, flashing at chimneys and walls, cleanup, magnetic sweep, and walkthrough with warranties in your name.

★★★★★

Verified Google review — pending

Verified Google review · Reviewer pending, Tempe · Metal Roofing

Tempe metal Roofing FAQ

Answered with numbers, not "it depends."

How much does a metal roof cost in Tempe, AZ?

For a typical 1,800 sq ft home, most Tempe metal roofs land between $23,600 and $43,100, or about $239 – $437 a month on 15-year financing at 8.99% APR. Standing seam, steep pitch, and complex trim push toward the top. Use the calculator on this page for your home.

Is metal worth it in Tempe?

Usually yes. In the valley, metal reflects valley heat, takes hail better than shingle, and lasts twice as long. If you plan to own the home 15-plus years, metal usually costs less per year than shingle. Under ten years, shingle often wins on cost. We show both numbers.

Standing seam or exposed fastener for a Tempe home?

Standing seam hides the fasteners, handles expansion in the heat, and is the longer-lived, more architectural option for homes. Exposed-fastener panels cost less and are ideal for shops, barns, and outbuildings, or for budget-conscious homes if you accept gasket maintenance in 15 to 20 years.

Does metal need HOA approval in Tempe?

City of Tempe permit for re-roofs; historic or design overlay review can apply near downtown and some planned south Tempe neighborhoods. Most Tempe neighborhoods have no design review on metal; where an HOA exists, we file the packet and samples for you.

Does metal help with heat in Tempe?

Yes. Light and cool-rated colors reflect a large share of solar heat, which lowers attic temperatures in Tempe summers. Pair it with proper ridge and intake ventilation.

Can you install metal over my existing shingles?

We tear off. Installing over old shingles hides deck damage, traps heat and moisture, and can void warranties. The tear-off is in the price.

Example roof prices

What a metal roof in Tempe costs, by home size.

Typical single-family homes, full tear-off and a complete new system. Steep pitch, extra layers, decking repairs, and drive time move the number. These are price range estimates, not quotes.

Monthly: 15 years at 8.99% APR
Home size
Architectural shingle
Tile
Metal
1,500 sq fthome
$10,100 – $14,100 $103 – $143/mo
$11,300 – $18,000 $114 – $182/mo
$19,700 – $35,900 $200 – $364/mo
2,000 sq fthome
$13,500 – $18,800 $137 – $190/mo
$15,000 – $24,000 $152 – $243/mo
$26,300 – $47,900 $266 – $485/mo
3,000 sq fthome
$20,300 – $28,100 $205 – $285/mo
$22,500 – $36,000 $228 – $365/mo
$39,400 – $71,800 $399 – $728/mo
4,000 sq fthome
$27,000 – $37,500 $274 – $380/mo
$30,000 – $48,000 $304 – $487/mo
$52,500 – $95,700 $532 – $970/mo
5,000 sq fthome
$33,800 – $46,900 $342 – $475/mo
$37,500 – $60,000 $380 – $608/mo
$65,600 – $119,600 $665 – $1,213/mo

Have a different size? Use the calculator above, or schedule a free inspection for a fixed written price.

Start with the roof in front of you.

Free Tempe inspection. Shingle and metal numbers side by side. A fixed written price within two business days.