Metal Roofing in Queen Creek

Standing seam and exposed-fastener systems coated to reflect valley heat in Queen Creek. The 40-year roof, priced in the open. It starts with a free in-person inspection.

★★★★★ 4.7 stars on GoogleGAF CertifiedTown of Queen Creek permit for re-roofs permits handled~2 hrs 20 min from our Thatcher office

Putting metal on a roof in Queen Creek

What we know about Queen Creek roofs that a Valley roofer doesn't.

Downtown / Ellsworth RdOcotilloCortinaEncanterraBarney FarmsCrismon HeightsSossaman / Meridian corridor

Fast-growing mix of late-1990s and 2000s subdivisions plus a large wave of 2010s–2020s builds. Concrete tile and HOA color rules are the norm; older farm-edge homes still carry original shingle or low-slope sections. As those 1990s roofs age out in the valley, metal is the upgrade we recommend most often in Queen Creek, because it reflects valley heat, takes hail better than shingle, and lasts twice as long. Done right, it is a 40-to-60-year roof. Done wrong, it leaks at year three at every fastener and panel end. The difference is entirely in the installer.

What Queen Creek does to a roof: on 1990s–2000s concrete tile, the felt is often the part that failed, not the tile Summer cells and haboob grit sit in tile pans and low-slope crickets A complete metal system here is more than panels: high-temp synthetic underlayment, ice-and-water shield at valleys and penetrations, ridge and intake ventilation sized to the attic, and light or cool-rated colors that reflect heat instead of soaking it up, properly hemmed eave and rake trim, sealed closures at ridge and hip, and either concealed clips (standing seam) or gasketed screws in the flat of the panel, never in the rib.

color, profile, and visible metal are restricted in most master-planned tracts 2020s production homes and older acreage lots need different checklists We install standing seam for homes and cabins where the roof is the architecture, and exposed-fastener panels for shops, barns, and budget-conscious homes. Both come in the black, blue, brown, gray, green, red, and tan you see across our Queen Creek jobs.

Neighborhood by neighborhood: Downtown / Ellsworth Rd, Ocotillo, and Cortina are where most Queen Creek metal conversations start. most master-planned neighborhoods runs design review on profile and color, and we file the packet and samples as part of the job.

Most Queen Creek metal installs are two to three days: tear-off and dry-in day one, panels and trim day two, details and cleanup day three. Town of Queen Creek permit for re-roofs; HOA design review in most master-planned neighborhoods. We pull the permit and handle the paperwork. You get photos at every stage and a walkthrough of the finished roof.

What metal costs in Queen Creek

Most Queen Creek metal roofs run $24,000 to $43,000, against $12,000 to $17,000 for shingle.

For a typical 1,800 sq ft home. Standing seam, steep pitch, complex trim, and cool-rated finishes push toward the top. The exact number comes from a free inspection and is a fixed line-item price.

Monthly: 15 years at 8.99% APR

Exposed fastener, simple gable

$18,400 – $45,500 $186 – $461/mo

Metal, 1,400 to 1,900 sq ft home. Typical Downtown / Ellsworth Rd home or shop, gasketed screws in the flat of the panel, your color.

Standing seam, cut-up roof

$28,900 – $71,800 $293 – $728/mo

Metal, 2,200 to 3,000 sq ft home. Concealed clips, hemmed trim, valleys and dormers, design-review colors.

Shingle alternative

$10,800 – $22,500 $109 – $228/mo

Shingle, 1,600 to 2,400 sq ft home. GAF architectural shingle for the homeowner who will sell in under ten years.

Roof cost calculator

What will my roof cost?

Type in your home's square footage and see your range for shingle, metal, and tile. This is a price range estimate, not a firm quote.

Monthly: 15 years at 8.99% APR
2,700 approximate sq ft of roof

Architectural shingle

GAF Timberline HDZ

$12,200 – $16,900 $123 – $171/mo

Metal roofing

Standing seam or exposed fastener

$23,600 – $43,100 $239 – $437/mo

Tile roofing

$13,500 – $21,600 $137 – $219/mo

Estimates only. Pitch, tear-off layers, decking condition, and drive time move the number. Your written price comes after a free in-person inspection.

Get my exact price, free

Financing available through financing partner; monthly payment ranges shown alongside the written scope. Decking replacement is priced per sheet up front and photographed before it's billed.

How a Queen Creek metal Roofing job goes

Two to three days on site. Everything else handled from Thatcher.

  1. 01

    Free inspection, roof and attic, photo report same day, shingle and metal numbers side by side.

  2. 02

    Written scope in two business days: profile, gauge, finish, color, warranty, exclusions.

  3. 03

    Permit and HOA: Town of Queen Creek permit for re-roofs permit pulled, design-review packet and color samples filed for most master-planned neighborhoods.

  4. 04

    Day one: tear-off, deck inspection and photos, high-temp underlayment, ice-and-water where the elevation calls for it, dry-in.

  5. 05

    Day two: panels cut to length, hemmed eave and rake trim, ventilation and flashing.

  6. 06

    Day three: details, flashing at chimneys and walls, cleanup, magnetic sweep, and walkthrough with warranties in your name.

★★★★★

Verified Google review — pending

Verified Google review · Reviewer pending, Queen Creek · Metal Roofing

Queen Creek metal Roofing FAQ

Answered with numbers, not "it depends."

How much does a metal roof cost in Queen Creek, AZ?

For a typical 1,800 sq ft home, most Queen Creek metal roofs land between $23,600 and $43,100, or about $239 – $437 a month on 15-year financing at 8.99% APR. Standing seam, steep pitch, and complex trim push toward the top. Use the calculator on this page for your home.

Is metal worth it in Queen Creek?

Usually yes. In the valley, metal reflects valley heat, takes hail better than shingle, and lasts twice as long. If you plan to own the home 15-plus years, metal usually costs less per year than shingle. Under ten years, shingle often wins on cost. We show both numbers.

Standing seam or exposed fastener for a Queen Creek home?

Standing seam hides the fasteners, handles expansion in the heat, and is the longer-lived, more architectural option for homes. Exposed-fastener panels cost less and are ideal for shops, barns, and outbuildings, or for budget-conscious homes if you accept gasket maintenance in 15 to 20 years.

Does metal need HOA approval in Queen Creek?

In most master-planned neighborhoods, yes. Color and profile are reviewed. We file the packet and samples for you. Town of Queen Creek permit for re-roofs; HOA design review in most master-planned neighborhoods.

Does metal help with heat in Queen Creek?

Yes. Light and cool-rated colors reflect a large share of solar heat, which lowers attic temperatures in Queen Creek summers. Pair it with proper ridge and intake ventilation.

Can you install metal over my existing shingles?

We tear off. Installing over old shingles hides deck damage, traps heat and moisture, and can void warranties. The tear-off is in the price.

Example roof prices

What a metal roof in Queen Creek costs, by home size.

Typical single-family homes, full tear-off and a complete new system. Steep pitch, extra layers, decking repairs, and drive time move the number. These are price range estimates, not quotes.

Monthly: 15 years at 8.99% APR
Home size
Architectural shingle
Tile
Metal
1,500 sq fthome
$10,100 – $14,100 $103 – $143/mo
$11,300 – $18,000 $114 – $182/mo
$19,700 – $35,900 $200 – $364/mo
2,000 sq fthome
$13,500 – $18,800 $137 – $190/mo
$15,000 – $24,000 $152 – $243/mo
$26,300 – $47,900 $266 – $485/mo
3,000 sq fthome
$20,300 – $28,100 $205 – $285/mo
$22,500 – $36,000 $228 – $365/mo
$39,400 – $71,800 $399 – $728/mo
4,000 sq fthome
$27,000 – $37,500 $274 – $380/mo
$30,000 – $48,000 $304 – $487/mo
$52,500 – $95,700 $532 – $970/mo
5,000 sq fthome
$33,800 – $46,900 $342 – $475/mo
$37,500 – $60,000 $380 – $608/mo
$65,600 – $119,600 $665 – $1,213/mo

Have a different size? Use the calculator above, or schedule a free inspection for a fixed written price.

Start with the roof in front of you.

Free Queen Creek inspection. Shingle and metal numbers side by side. A fixed written price within two business days.